Sign Permit in Moore, OK — Cost, Requirements & Process
All permanent commercial signs in Moore require a sign permit issued by Community Development under Chapter 22 of the Code of Ordinances. This includes wall signs, monument signs, pole signs, projecting signs, and electronic message centers (EMC) including LED reader boards. Window signs under 25% of window area, real estate signs, political signs, and garage sale signs do NOT require a permit.
Sign area and height are capped by zoning district. C-2 General Commercial allows up to 200 sq ft total per business with a maximum 25-foot pole sign. C-3 Highway Commercial along I-35 allows 300 sq ft and 35-foot pole signs. C-1 Neighborhood Commercial limits to 100 sq ft and 8-foot monument signs. Industrial districts allow 200 sq ft and 25-foot signs.
A Moore-specific quirk: pole signs over 8 feet require engineered drawings stamped by an OK-licensed engineer, with wind-load calculation at the 135 mph design wind speed adopted under the post-2013 amendments. This is stricter than the Oklahoma 115 mph standard and out-of-town sign companies regularly miss it. Electronic message centers must hold each display for a minimum 8 seconds with no animation, scrolling, or video, and must auto-dim from sunset to sunrise.
Who needs this permit
Is this permit required for your Moore project?
Any commercial property owner, tenant, or sign company installing or replacing a permanent sign in Moore. Includes monument signs, pole signs, wall signs, projecting signs, electronic message centers, and any sign attached to or supported by a building or freestanding structure.
Moore cost range
Expected permit fees in Moore
Sign permit: $50 base + $1 per sq ft of sign area. A 50 sq ft monument sign runs $100. A 200 sq ft pole sign runs $250. Engineering for pole signs over 8 feet adds $500-$2,000 depending on engineer. Electrical permit for illuminated signs is separate at $40 base.
Fees reference the current Moore Community Development fee schedule. Contact (405) 793-5053 to confirm for your specific project valuation.
Required documents
What Moore Community Development needs from you
- Moore sign permit application
- Site plan showing sign location, distance from property lines, and right-of-way
- Engineered drawings stamped by an OK-licensed engineer for pole signs over 8 feet
- Wind-load calculation at 135 mph design wind speed (Moore amendment)
- Electrical permit application if sign is illuminated (separate permit, OCIB-licensed electrician)
- Photographs of existing signage on the property
- Manufacturer specs for any electronic message center
Process & timeline
Step-by-step process in Moore
- 1
Submit application at City Hall or via GovBuilt portal.
- 2
Plan review: 7-10 business days. Reviewers verify zoning district allowance, area / height limits, setbacks from ROW.
- 3
Pay permit fee on approval and collect permit card.
- 4
Foundation inspection (if pole sign is poured) before backfill.
- 5
Electrical inspection of any illuminated sign — separate permit, separate inspection.
- 6
Final inspection on illumination check and area verification.
Common reasons for rejection
Why Moore rejects sign permit applications
- Sign area exceeds the per-business cap for the zoning district
- Pole sign over 8 feet without engineered drawings or wind-load calculation
- Sign in or projecting over public right-of-way
- EMC display interval less than 8 seconds, animation or scrolling enabled, or no auto-dimming
- Illuminated sign without separate electrical permit
- Sign not anchored to manufacturer specifications
Skip the rejection cycle on your Moore sign permit
Permitly analyzes your project against Moore Community Development requirements and generates a pre-filled application packet in under 3 minutes. First analysis is free.
Moore Community Development: (405) 793-5053 · 301 N Broadway Ave, Moore, OK 73160
Sign permit FAQs — Moore, OK
How much is a Moore sign permit?
$50 base plus $1 per sq ft of sign area. A 50 sq ft monument sign costs $100. A 200 sq ft pole sign costs $250. Engineering for over-8-foot pole signs is additional and not included in city fees.
Can I have an LED reader board in Moore?
Yes, in C-2, C-3, I-1, and I-2 districts. Maximum 50% of total sign area, minimum 8-second display interval, no animation or scrolling, auto-dimming from sunset to sunrise, maximum 0.3 foot-candles above ambient at 250 feet.
Do I need a permit for a window sign in Moore?
Not if total window signage is under 25% of window area. Above 25% triggers a sign permit. Vinyl lettering on storefront windows is the most common borderline case — measure carefully.
Related Moore permits
Building Permit
Moorerequirements, cost & process
Electrical Permit
Moorerequirements, cost & process
Commercial Tenant Improvement Permit
Moorerequirements, cost & process