Driveway Permit in Moore, OK — Approach, Width & Right-of-Way
Moore requires a driveway / right-of-way permit for any new or modified driveway approach, sidewalk replacement, or work in the public right-of-way. The fee is $40 flat for standard residential driveways. Over-width driveways (above 24 feet wide at the property line) trigger engineering review, which can add $500-$2,000 for larger projects.
Standard residential driveway specs: 18 feet maximum width at the curb / street edge, 24 feet maximum at the property line, 4-inch concrete thickness over compacted subgrade, ADA-compliant cross slope (maximum 2.0%) at the sidewalk crossing. Minimum 5-foot offset from any side property line.
Sidewalk replacement falls under the same permit. Existing sidewalk in disrepair or damaged during construction must be replaced to current ADA standard — 4 feet minimum width, 4-inch concrete thickness, ADA detectable warning panels at curb ramps, maximum 2.0% cross slope, maximum 5% running slope, level landings every 30 feet on continuous slope.
Who needs this permit
Is this permit required for your Moore project?
Any property owner constructing a new driveway, widening an existing driveway, replacing sidewalk in the public ROW, installing a culvert under a driveway approach, or doing any work in the right-of-way (street tree planting, irrigation across ROW, etc.).
Moore cost range
Expected permit fees in Moore
Standard driveway / ROW permit: $40 flat. Engineering review for over-width or commercial: $500-$2,000. ROW barricade / construction parking deposit: $250 (refundable). Public sidewalk / curb cut deposit: $500.
Fees reference the current Moore Community Development fee schedule. Contact (405) 793-5053 to confirm for your specific project valuation.
Required documents
What Moore Community Development needs from you
- Moore driveway / ROW permit application
- Site plan showing driveway location, width at curb and at property line, distance from side property lines
- Cross-section detail showing concrete thickness and subgrade preparation
- ADA compliance detail at sidewalk crossing
- Engineering for any over-width driveway or commercial entrance
- Insurance certificate listing City of Moore as additional insured (recommended for contractor work)
Process & timeline
Step-by-step process in Moore
- 1
Submit application at City Hall or GovBuilt.
- 2
Plan review: 3-7 business days for standard residential.
- 3
Pre-pour inspection — verifies subgrade compaction, form lines, expansion joints.
- 4
ADA inspection at sidewalk crossing — verifies cross slope, detectable warnings if at curb ramp.
- 5
Final inspection — verifies finish, any damage to adjacent ROW restored.
Common reasons for rejection
Why Moore rejects driveway / right-of-way permit applications
- Driveway width over 18 feet at the curb without engineering
- ADA cross slope at sidewalk crossing over 2.0%
- Concrete thickness below 4 inches
- No expansion joint at house-to-driveway interface or at sidewalk
- Driveway too close to side property line (5 feet minimum)
- Damage to adjacent curb / sidewalk not restored
Skip the rejection cycle on your Moore driveway / right-of-way permit
Permitly analyzes your project against Moore Community Development requirements and generates a pre-filled application packet in under 3 minutes. First analysis is free.
Moore Community Development: (405) 793-5053 · 301 N Broadway Ave, Moore, OK 73160
Driveway / Right-of-Way permit FAQs — Moore, OK
How wide can my Moore driveway be?
18 feet maximum at the curb, 24 feet maximum at the property line. Wider requires engineering review and a separate engineered drawing.
Do I need a permit to replace my sidewalk in front of my Moore house?
Yes. Sidewalks are in the public right-of-way and require a permit. Replacement must be to current ADA standard — 4 feet minimum width, 4-inch concrete thickness, max 2% cross slope.
Can I install a culvert under my Moore driveway?
Yes, with permit. Culvert sizing is reviewed by Moore Engineering — typically 18-inch reinforced concrete pipe for standard residential, larger if drainage volume demands it. Engineering may require additional inlet protection.
Related Moore permits
Building Permit
Moorerequirements, cost & process
Fence Permit
Moorerequirements, cost & process
Commercial Tenant Improvement Permit
Moorerequirements, cost & process