Permitly

Fence Permit in Edmond, OK — Cost, Requirements & Process

A fence permit in Edmond is required for any fence over 6 feet in residential rear or side yards, all front-yard fences, all commercial fences, and any fence within a corner-lot sight triangle. Fences under 6 feet in residential rear and side yards generally do not require a permit but must still meet setback and material standards from Title 22.

Front-yard fences are capped at 4 feet if solid (wood privacy, masonry) or 6 feet if open and decorative (wrought iron, picket with at least 50% openness). Rear and interior side yards allow up to 8 feet. Corner lots have a 30-inch maximum height inside the sight triangle (typically 25 ft from the curb radius at intersections) so drivers can see oncoming traffic and pedestrians.

The sight triangle is the most common rejection on Edmond fence permits. A perfectly legal 6-foot privacy fence can become illegal at the corner because it interferes with sight distance. Always verify the sight triangle on corner lots before fence material is delivered.

Who needs this permit

Is this permit required for your Edmond project?

Property owners and contractors installing any fence over 6 ft, any front-yard fence, any commercial fence, or any fence on a corner lot in Edmond.

Edmond cost range

Expected permit fees in Edmond

Residential fence (over 6 ft, front yard, or corner lot): $30 flat. Commercial fence: $75 flat. Retaining wall over 4 ft exposed: $75 with engineered drawings.

Fees reference the current Edmond Planning, Licensing & Development (PLL) fee schedule. Contact (405) 359-4780 to confirm for your specific project valuation.

Required documents

What Edmond Planning, Licensing & Development (PLL) needs from you

  • Fence permit application via PLL portal
  • Site plan showing fence location, height, materials, and (if corner lot) sight triangle clearance
  • Material specification (wood, vinyl, chain link, wrought iron)
  • For commercial: contractor license and insurance

Process & timeline

Step-by-step process in Edmond

  1. 1

    Submit application via PLL portal. Issuance: 1 to 2 business days.

  2. 2

    No inspection on standard residential fences. Commercial fences may require post-installation inspection if part of a larger site plan.

  3. 3

    Typical clock time: 1 to 2 weeks.

Common reasons for rejection

Why Edmond rejects fence permit applications

  • Front-yard solid fence over 4 ft
  • Corner-lot fence inside the sight triangle over 30 inches
  • Fence on or over a recorded easement
  • Commercial fence with no contractor registration
  • Retaining wall over 4 ft without engineered drawings

Skip the rejection cycle on your Edmond fence permit

Permitly analyzes your project against Edmond Planning, Licensing & Development (PLL) requirements and generates a pre-filled application packet in under 3 minutes. First analysis is free.

Edmond Planning, Licensing & Development (PLL): (405) 359-4780 · 10 S Littler Ave, Edmond, OK 73034

Fence permit FAQs — Edmond, OK

Do I need a permit for a 6 ft privacy fence in my back yard in Edmond?

No permit required for a 6 ft fence in the rear or interior side yard if it is not on a corner lot. Permit is required if the fence is over 6 ft, in the front yard, or in a corner-lot sight triangle.

How tall can my front-yard fence be in Edmond?

4 feet if solid (wood, masonry). 6 feet if open or decorative (wrought iron, picket with 50% or more openness). Permit required.

What is a sight triangle?

A triangular area at corner intersections where structures and fences over 30 inches are prohibited so drivers can see oncoming traffic and pedestrians. Typically 25 ft from the curb radius. Always check before installing a corner fence.

Related Edmond permits

Not legal advice. Permitly is a software tool that summarizes publicly available Edmond Planning, Licensing & Development (PLL) requirements. Information on this page is general guidance, not legal, engineering, or code-compliance advice. Fees, forms, and review timelines can change without notice. Always confirm requirements with Edmond Planning, Licensing & Development (PLL) at (405) 359-4780 or a licensed professional before submitting an application.